CEB-404 Biodegradable Emulsion Breaker
CEB-404 is a readily biodegradable nonionic demulsifier used to produce well-defined oil and water interface and give operators better process control. It provides fast initial water drop in a wide range of chlorides in the produced water.
Click here for technical sheet.
EMU Emulsion Breaker Series
EMU-101 is a demulsifier for heavier (12 to 22 gravity API) crudes. It provides fast initial water drop in a wide range of chlorides in the produced water. It will not normally treat these crudes without some heat.
Click here for technical sheet.
EMU 200 Series
EMU-201 A sulfonate with a small percent of moderate molecular weight polyglycol. Extremely wide treating range. Not subject to over treating. EMU-201 is a rugged batch treating emulsion breaker.
EMU-202 A blend of resins, polyols and epoxides specifically blended for fast water drop and dissolution of tight emulsions. Extremely wide treating range. Also available in concentrated form as EMU-202C.
EMU-203 A blend of esters and resin which gives good overall treating characteristics.
EMU-204 A blend of esters and resin which yields good cost performance and a wide treating range.
EMU-205 A blend of epoxides, polyols and resins which yields good water drop and resolves tight emulsions.
EMU-206 Good oil treater on medium gravity crudes. Can be used in conjunction with EMU-208 to give outstanding results.
EMU-207 A blend of polyol esters and resins. This product is a quick water dropper. Best performance on medium gravity oils.
EMU-208 A sulfonate with narrow treating range. Very useful in treating high gravity oils.
EMU-209 A broad spectrum of bases with proven effectiveness on treatment of waste and slop oils. EMU-209 provides clean top oil, good water break and good separation of solids.
EMU-210 A blend of a phenolic resin and a polyol ester. The product is useful in the treatment of low gravity crude oils containing paraffins and asphaltenes.
Click here for technical sheet.
NEA-20N Non-Emulsifier
NEA-20N is a nonionic non-emulsifying agent for use in all types of well stimulation. It is a versatile surfactant blend that provides strong water-wetting properties and interfacial tension reduction. NEA-20N is compatible with a wide range of acidizing and fracturing fluids and has been formulated to function with acid inhibitors without adversely affecting inhibitor corrosion rate. NEA-20N works effectively in 15% to 28% Hydrochloric Acid.
Click here for technical sheet.
NECC-24 Clay Protection/Non-Emulsifier
NECC-24 is a unique combination of a non-surface active polyquaternary amine and surfactant. NECC-24 is designed to provide both clay protection and non-emulsification properties in a single additive package. It provides both temporary and long lasting clay stabilization to protect against formation damage caused by clay swelling and/or migration. NECC-24 minimizes chemical handling requirements.
Click here for technical sheet.
REB-1811 Reverse Emulsion Breaker
REB-1811 is effective for a variety of liquid/solids or reverse emulsion water clarification processes. REB-1811 is designed primarily for application in frac flowback water recycling facilities due to it's compatability with frac fluids. REB-1811 is designed to allow complete oil separation where flowback water containing oil carryover must be removed to meet effluent or reuse quality standards. This product has some application in raw water clarification and as a sludge conditioner.
Click here for technical sheet.
TB-401 Tank Bottom/Non-Emulsifier
TB-401 is used extensively to clean up producing wells down hole as well as clean out the production string and flowline. This product will carry on to the tanks to aid in the cleanup of tank bottoms. It is effective on paraffin and asphaltene-based crudes.
Click here for technical sheet.
SEB-302 Biodegradable Emulsion Breaker
SEB-302 is a unique combination of propylene glycol and natural surfactants. This readily biodegradable demulsifier is used to break emulsions that occur in petroleum production operations. It provides fast initial water drop in a wide range of chlorides in the produced water.
Click here for technical sheet.
NEB-102 Biodegradable Emulsion Breaker
NEB-102 is a readily biodegradable demulsifier used to help meet crude oil sales specifications, clean up produced water and enhance the separation process.
Click here for technical sheet.
BSP-1622 Biological Demulsifier
BSP-1622 is a wide-range biological water clarifier containing a proprietary combination of natural, facultative anaerobic species selected for their heavy biosurfactant production. BSP-1622 increases water clarity with its ability to metabolically solubilize iron sulfide present in the well system.
Click here for technical sheet.
EB-220 Emulsion Breaker
EB-220 is a demulsifier used to break water-in-oil emulsions that occur in petroleum production operations. It provides fast initial water drop in a wide range of chlorides in the produced water. EB-220 is composed of a non-ionic surfactant blend for optimum emulsion separation.
Click here for technical sheet.